The Godox X3 flash trigger is a modern Godox X 2.4GHz system transmitter with touchscreen and TTL support. With a compact, lightweight and simple design, the X3 features an intuitive touchscreen and controls for easy access and quick setting changes.
Godox X3 TTL is a groundbreaking, minimalist TTL radio trigger with a touch screen designed to combine lightness and compact dimensions with intuitive operation. X3 enables easy control of devices in the Godox X 2.4GHz system.
The touch interface, combined with physical buttons, makes device operation intuitive after just a few moments. Like other Godox flash triggers such as XPro and X2, X3 supports TTL, manual, multi-flash, as well as HSS, front and rear curtain synchronization.
With a clear OLED touchscreen, X3 offers high-contrast and fast-refreshing information. Excellent for both indoor and outdoor sessions, it allows you to adjust the screen brightness by sliding left or right. The screen lock function is also available to prevent accidental touches.
The two-way TCM mode in X3 allows for instant and easy conversion, then transferring parameters between TTL and manual modes. Whether you prefer automatic operation or precise control in manual mode, X3 allows for quick switching between them.
X3 allows control and triggering of devices in the Godox X 2.4GHz system. The backup channel scanning feature prevents interference from other users operating in the same system. The fast synchronization function is also a novelty.
Equipped with a lithium battery, the X3 transmitter can be charged from 0% to 100% in just 2 hours via USB-C. The USB-C port is also used for software updates.
Homepage: https://www.godox.com/product-a/X3.html
Firmware updating
The latest firmware version is currently version 1.24 for the Canon trigger (released 19.06.2024)
You must use the Godox G3 Launcher v1.1 and unzip the downloaded file so you have the firmware file ready (X3_C_v1.24_APP.bin)
- Connect your Godox X3 to your computer with a USB-C cable and turn the power on. Navigate to Settings and Device info and choose Upgrade.
- Start the firmware update process from the Godox G3 Launcher v1.1 app and when it is finished turn the Godox X3 unit off and on again. The new firmware will now be installed on your Godox X3 unit.
